Nautilus

Stackable Development Boards

Nautilus

Open hardware and software development boards based on PIC18F47J53 microcontroller. The different stackable modules allows to build fully functional prototypes in a short period of time.

PIC F18 Microcontroler

Custom PCB The main board is based on the Microchip PIC18F47J53 microcontroller running at 48Mhz. It can be programmed by USB using the microchip bootloader firmware or the PIC kit 5 programmer.

Debug Board

Custom PCB The software debugging board contains a UART-USB module that allows data to be displayed on a serial console (/dev/ttyUSB0).

IO 8x8

Custom PCB 16 opto-isolated digital inputs (8) and outputs (8) for system protection.

Wireless (IEEE 802.15.4)

Custom PCB The wireless board allowss to use MRF24J40ME or MRF24J40ME Transceiver (2.4 GHz IEEE 802.15.4) that supports ZigBee®, MiWi™ and MiWi P2P protocols.

Weather Station

Custom PCB This board provides connection to a wind vane, an anemometer, a rain gauge, two temperature sensors and one moisture sensor.

Solar Charger

Custom PCB This board allows to charge a lead–acid battery with a solar panel and provides voltage nd current sensing.

Stackable Boards

Custom PCB The boards are designed to be stackable, allowing you to create systems that contain only the required components and develop prototypes fast and easily.

Open Hardware

Open Hardware Both hardware and software are available for non-commercial use in as open software and hardware.